MPS4SENS NOX

PS4x4C2-A-U-S1.5-Kr-E1/K1/V1/W1 | 4594.74-H.42

4 channel premium pyro detector to measure nitrogen compounds

  • Highly sensitive & long-term stable
  • High detectivity: up to 4,0*108 cmHz1/2/W
  • High sensitivity: up to 200000 V/W
  • Measuring gas: H2O (filter, CWL: 6580 ± 40 nm/ HBW: 200 ± 35 nm), NO (filter, CWL: 5300 ± 30 nm/ HBW: 200 ± 20 nm), SO2 (filter, CWL: 7300 ± 50 nm/ HBW: 180 ± 20 nm)
  • Applications: e.g. industrial applications, environmental Technology, process monitoring
from 128,17 

plus taxes and shipping

Availability:

Euro $ US-Dollar

Bulk prices (Minimum order quantity: 10 Pieces)

from 10 Pieces 176,47  / Piece
from 25 Pieces 140,46  / Piece
from 50 Pieces 128,17  / Piece

The product is currently only available in limited quantities. Please contact our sales team.

Description

This premium pyroelectric quad detector is tailored for demanding measurement applications for the analysis of nitrogen oxides (NOX) in environments from -20 to 85 °C. The 4 optical filters determine the infrared detection of the following gases: water vapor (H2O) (CWL: 6580 ± 40, HBW: ± 35 nm), nitric oxide (NO) (CWL: 5300 ± 30, HBW: ± 20 nm), sulfur dioxide (SO2) (CWL: 7300 ± 50, HBW: 180 ± 20 nm) and an embedded reference channel (CWL: 5060 ± 25, HBW: 100 ± 15 nm).

The four-channel IR pyrodetector achieves an especially high detectivity of up to 4.0*108 cmHz1/2/W and sensitivity of up to 200000 V/W. The MPS4SENS NOX provides reliable measurement values in ambient temperatures between -20 and 85 °C, e.g. for industrial gas measurement or process analysis in various industry and manufacturing areas, such as chemical, textile, environmental technology, recycling or exhaust gas technology.

It possesses 4 sensor chips with a ceramic-pyroelectric thin-film membrane at its core. Micro-Hybrid is the only manufacturer of pyroelectric 4-channel detectors with a high performance membrane in a TO39 package. The special Micro-Hybrid product design enables a higher read-out rate up to 100 Hz and short response times for reliable measurement results in NDIR gas analysis. The detector is characterized by a broad spectral response 2 - 15 µm (optimized from 3 - 5 µm), high sensitivity with a modulation frequency up to 100 Hz, a low microphone effect due to the low membrane mass, very low temperature dependence and an amplified signal in current mode.

For additional scale prices and possible individual, technical adaptations, please contact our sales Team.

Technical data

Applications Gas analysis
Measuring gas
  • H2O
  • NO
  • SO2
Package TO39
Aperture 1.5 x 1.5
Channels 4
Operating temperature [°C] -20 … +85

Verwandte Artikel

MTS4SENS200 anesthesia side

MTS4SENS200 anesthesia

TS4x200B-A-S1.5-1-Kr-E1/K1/V1/W1 | 4594.48-2.42

from 111,45 

Availability:

4 channel premium IR thermopile for measurement of anesthetic gases