NDIR evaluation kit

NDIR evaluation kit | 7206.02-5.51

Test unit for evaluation of IR emitters and detectors

ATTENTION: Kit does not include IR components. We suggest purchasing our NDIR bundles.

  • Evaluation of emitters and detectors without development of electrical circuit or software
  • Easy setup of IR components and measurement of their output data, readout option for 1 / 2 channel pyro or thermopile detectors
  • Allows optimization of the operating parameters for the specific application
  • Visualization, processing and data storage of the signals possible
  • Applications: prototypes for gas analysis for IR components evaluation, concept studies or use in education
500,00 

plus taxes and shipping

available

Euro $ US-Dollar
NDIR evaluation kit

Description

ATTENTION: Kit does not include IR components. We suggest purchasing our NDIR bundles.

The evaluation kit enables a quick access to NDIR gas analysis. It can be used to test and evaluate thermopile or pyroelectric detectors together with Micro-Hybrid's IR emitters without having to develop an electrical circuit and software. The selection of the optimal IR components for the gas measurement system is accelerated. Operating parameters can be optimized for the specific application. Easy control of the IR emitter and readout and monitoring of the detectors' output data provide flexibility for testing and optimizing your own gas measurement system. A measurement cuvette is included in the set to allow measurements in the blink of an eye. This can significantly shorten the development process.

 

Product highlights

  1. Measurement of two channels at the same time
  2. Integrated power supply for emitters and pyro detectors
  3. In addition, the frequency and duty cycle of the emitter can be adjusted
  4. Integrated amplifier circuit of the output signal, adjustable in two stages via software
  5. Signal conditioning can be activated via software (low-pass/high-pass filter)
  6. By software selectable signal evaluation (RMS / peak to peak / amplitude) including export function
  7. USB interface for communication with the attached PC software (visualization, processing and data storage of the signals) 

Our NDIR evaluation kit can be used in many areas of infrared measurement

  • Gas analysis for industrial component evaluation,
  • Non-contact temperature measurement,
  • Flame detection,
  • Laboratory and experimental setups,
  • Training and education

 

The system for testing our emitters and IR detectors is optimized for the products from the series:

  • TO39 NAC emitter / JSIR 350-4
  • TO46 NAC emitter / JSIR 350-5
  • 2-channel TO39 thermopile detector / MTS2SENS
  • 2-channel TO39 pyroelectric detector / MPS2SENS

Together with the NDIR bundles, our evaluation kit represents the perfect combination for easy evaluation of IR measurement systems. Both products are available from stock. All technical information and setup instructions can be found in the manual.

Technical data

Measuring gas
  • CO2
  • H2O
  • NO
  • SF6
  • N2O
  • CO
  • SO2
  • -OH
  • CH4
  • CXHY
  • Halothan
  • Desfluran
  • Isofluran
Applications Gas analysis