• Home
  • Blog
  • Save time in R&D projects - IR emitters & detectors
  • Application
  • Company
  • Technologies and Products
Engineer testing electronic components on PCB

Saving time is saving money

Sampling set for short results in development projects

Gain advantages on the way to market launch: competitive edge thanks to test measurements that can be performed at short notice of frequently used gases such as CO2, CO, HC, SF6, NOX, H2O, NO, SO2 in industrial applications.

Saving time is saving money

With limited project times and development budgets, our NDIR bundle can speed things up in many ways. Available at short notice and even in small quantities - developers will save valuable project hours searching for different suppliers thanks to this perfect mix of IR emitters and detectors, as well as the painstaking matching of both components for the test setup.

For selected process gases, the IR components are available from one supplier in a minimum of time and without high quantities, thanks to the prefabricated kit. The set enables rapid tests with different emitter setups in the measurement system as well as the evaluation of sensors for the individual measurement task.

The NDIR bundle "industrial gases" combines matched thermal IR emitters and thermopile detectors for test measurements in industrial applications such as


  • Condition monitoring
  • Process control and monitoring,
  • Plant control
  • Quality check
  • Exhaust gas analysis


The box includes four NAC-based JSIR 350 series emitters in different housings and six matched MTS thermopiles with two or four channels:


  1. TS4x200B-A-S1.5-1-2-D2/E1/F1/G2 - detector 3C low CO2/CO/HC
  2. TS4x200B-A-S1.5-1-2-D2/E2/F1/G2 - detector 3C high CO2/CO/HC
  3. TS4x200B-A-S1.5-1-2-I1/L1/H1/D5 - detector NOX H2O/NO/SO2
  4. TS2x200B-A-S1.5-1-Kr-L1/D2 - detector N2O
  5. TS2x200B-A-S1.5-1-Kr-M1/D5 - detector -OH
  6. TS2x200B-A-S1.5-1-Kr-J1/D5 - detector SF6
  7. JSIR350-4-AL-R-D6.0-0-0 - IR source TO39, reflector open
  8. JSIR350-4-AL-R-D6.0-1-A4 - IR source TO39, reflector with filter BaF2
  9. JSIR350-4-AL-C-D5.8-0-0 - IR source TO39, cap open
  10. JSIR350-5-BL-R-D3.6-0-0 - IR source TO46, reflector open


Micro-Hybrid is the only supplier worldwide to produce both IR emitters and detectors for gas analysis in-house.

MicroFLOW gas flow sensor with printed circuit boards, cuvette, and gas connections

New flow sensors for NDIR gas anlyses

  • Technologies and Products
Men stand infront of a large telescope mirror and look at a tablet

Sensors for the world´s largest eye.

  • Application
  • Company
  • Sports
  • Technologies and Products

Electronics for position sensors

  • Application
  • Technologies and Products