With limited project times and development budgets, our NDIR bundle can speed things up in many ways. Available at short notice and even in small quantities - developers will save valuable project hours searching for different suppliers thanks to this perfect mix of IR emitters and detectors, as well as the painstaking matching of both components for the test setup.

For selected process gases, the IR components are available from one supplier in a minimum of time and without high quantities, thanks to the prefabricated kit. The set enables rapid tests with different emitter setups in the measurement system as well as the evaluation of sensors for the individual measurement task.

The NDIR bundle "industrial gases" combines matched thermal IR emitters and thermopile detectors for test measurements in industrial applications such as

• Condition monitoring
• Process control and monitoring,
• Plant control
• Quality check
• Exhaust gas analysis

The box includes four NAC-based JSIR 350 series emitters in different housings and six matched MTS thermopiles with two or four channels:

1. TS4x200B-A-S1.5-1-2-D2/E1/F1/G2 - detector 3C low CO₂/CO/HC
2. TS4x200B-A-S1.5-1-2-D2/E2/F1/G2 - detector 3C high CO₂/CO/HC
3. TS4x200B-A-S1.5-1-2-I1/L1/H1/D5 - detector NOX H₂O/NO/SO₂
4. TS2x200B-A-S1.5-1-Kr-L1/D2 - detector N₂O
5. TS2x200B-A-S1.5-1-Kr-M1/D5 - detector -OH
6. TS2x200B-A-S1.5-1-Kr-J1/D5 - detector SF₆
7. JSIR350-4-AL-R-D6.0-0-0 - IR source TO39, reflector open
8. JSIR350-4-AL-R-D6.0-1-A4 - IR source TO39, reflector with filter BaF₂
9. JSIR350-4-AL-C-D5.8-0-0 - IR source TO39, cap open
10. JSIR350-5-BL-R-D3.6-0-0 - IR source TO46, reflector open

Micro-Hybrid is the only supplier worldwide to produce both IR emitters and detectors for gas analysis in-house.