Saving time is saving money

Sampling set for short results in development projects

Gain advantages on the way to market launch: competitive edge thanks to test measurements that can be performed at short notice of frequently used gases such as CO2, CO, HC, SF6, NOX, H2O, NO, SO2 in industrial applications.

Diesen Beitrag teilen

Saving time is saving money

With limited project times and development budgets, our NDIR bundle can speed things up in many ways. Available at short notice and even in small quantities - developers will save valuable project hours searching for different suppliers thanks to this perfect mix of IR emitters and detectors, as well as the painstaking matching of both components for the test setup.

For selected process gases, the IR components are available from one supplier in a minimum of time and without high quantities, thanks to the prefabricated kit. The set enables rapid tests with different emitter setups in the measurement system as well as the evaluation of sensors for the individual measurement task.

The NDIR bundle "industrial gases" combines matched thermal IR emitters and thermopile detectors for test measurements in industrial applications such as

Condition monitoring
Process control and monitoring,
Plant control
Quality check
Exhaust gas analysis

The box includes four NAC-based JSIR 350 series emitters in different housings and six matched MTS thermopiles with two or four channels:

TS4x200B-A-S1.5-1-2-D2/E1/F1/G2 - detector 3C low CO₂/CO/HC
TS4x200B-A-S1.5-1-2-D2/E2/F1/G2 - detector 3C high CO₂/CO/HC
TS4x200B-A-S1.5-1-2-I1/L1/H1/D5 - detector NOX H₂O/NO/SO₂
TS2x200B-A-S1.5-1-Kr-L1/D2 - detector N₂O
TS2x200B-A-S1.5-1-Kr-M1/D5 - detector -OH
TS2x200B-A-S1.5-1-Kr-J1/D5 - detector SF₆
JSIR350-4-AL-R-D6.0-0-0 - IR source TO39, reflector open
JSIR350-4-AL-R-D6.0-1-A4 - IR source TO39, reflector with filter BaF₂
JSIR350-4-AL-C-D5.8-0-0 - IR source TO39, cap open
JSIR350-5-BL-R-D3.6-0-0 - IR source TO46, reflector open

Micro-Hybrid is the only supplier worldwide to produce both IR emitters and detectors for gas analysis in-house.

Standards in electronics manufacturing

Reliable parameters for the quality of the manufacturing process and product.

Uniform standards for products, their manufacture from raw materials to shipping - An overview of the most important standards and certificates in electronics production.

Company Technologies and Products

15.09.2026 by Fabio Seime

How Micro-Hybrid’s NDIR Technology Redefines Refrigerant Gas Detection

Refrigerant gas detection requires reliable performance across low leak concentrations and high exposure levels. Micro-Hybrid’s NDIR sensor technology uses an innovative multiple-reflection optical design to measure ammonia and other refrigerants precisely, even within compact sensor geometries. The result is a stable alternative to electrochemical sensing for demanding refrigeration and industrial safety applications.

Application Technologies and Products